-
Store the machine in a covered place away from the weather.
-
In cold weather, if there is a risk of freezing, apply the guidelines stated in the Storage chapter (Storage).
-
Clean the machine. Do not use a pressure jet directly on the Vision boxes. After cleaning, check that the optical surfaces are perfectly clean. If necessary, clean them with glass cleaning fluid and rinse well with water.
-
Check the nozzles by following the instructions in the Nozzle check chapter (Nozzle check).
-
Lift the side modules.
-
Switch off the machine by pressing the green button on the ON/OFF control box.
INFORMATION
If the machine needs to be turned on again directly after it has been shut down, you must wait for the loss of the Wi-Fi signal on the tablet before turning it back on. This process takes a few seconds.