Breadcrumbs

Cleaning after treatment interruption

INFORMATION

In case of treatment interruption:

  • Let the mixture sit for a maximum of 8 hours. After that, it is no longer usable.

  • Perform the Cleaning after treatment interruption procedure.


  1. Turn off the pump.

  1. Set the valves to Cleaning machine position mode.

INFORMATION

Do not use this 3D illustration as a reference. Please refer to the valve position modes table.

100062-01.png


Images_Panneau de commandes V4.0.png

  1. Engage the pump.

  2. Activate Flushing mode on the app.

  3. Spray approximately 100 litres | 26 US gal on an untreated area.

  4. Turn off the pump.

  1. Clean the filters (Cleaning).

FILTRE_ASPIRATION.png

Images_filtre_de_troncon.png

  1. When treatment is resumed, set valve D to 100% and agitate the mixture for 10 minutes in both zones. (Agitation).

Images_Vanne Agitation.png