Breadcrumbs

Manufacturer's plates

INFORMATION

  • Do not remove the manufacturer's plates, homologation plates and markings attached to the machine and its components.

  • These plates must be present even when the machine is resold.

  • These plates must be present during the periodic inspection of the machine.

Sprayer manufacturer's plate

Images_Plaque_module_pulverisation_CE.png


Images_Localisation_plaque_module_pulverisation.png


The nameplate indicates the serial number that should be provided to the Ecorobotix representative when communicating or ordering parts.

This plate meets the requirements of the machinery directive (2006/42/EC 1.7.3) and is marked as follows:

  • Manufacturer’s name and address

  • CE certification mark

  • Designation

  • Type

  • Mass

  • Year of construction

  • Serial number


Tank system manufacturer's plate

Images_Plaque_module_double_cuve_CE.png


PLAQUE_MODULE_DOUBLE-CUVE.png


The nameplate indicates the serial number that should be provided to the Ecorobotix representative when communicating or ordering parts.

This plate meets the requirements of the machinery directive (2006/42/EC 1.7.3) and is marked as follows:

  • Manufacturer’s name and address

  • CE certification mark

  • Designation

  • Type

  • Mass

  • Year of construction

  • Serial number


Pump manufacturer's plate

Tank-System_V4.0_1.png

The serial number is printed on the supplier plate attached to the pump.


  • Name and address of the manufacturer

  • Year of construction

  • Serial number

  • Designation

  • Flow rate

  • Pressure

  • Type

  • Test