INFORMATION
The preparation of a spray mixture requires agitation to obtain a homogeneous mixture. Depending on the volume of spray mixture, activate only the submerged agitator nozzles to avoid excessive foaming.
-
Ensure that the valves are in Mixture Prep: 2. Full Mixture Agitation position mode.
INFORMATION
Do not use this 3D illustration as a reference. Please refer to the valve position modes table.
-
Open the Agitation1 valve (0–50%).
-
Set the flow-rate regulator to the desired setting.
-
Turn on the pump.
-
Agitate for a few minutes.
-
Open the Agitation2 valve (50–100%).
-
Agitate for a few minutes.