INFORMATION
In case of treatment interruption:
-
Let the mixture sit for a maximum of 8 hours. After that, it is no longer usable.
-
Perform the Cleaning after treatment interruption procedure.
-
Turn off the pump.
-
Set the valves to Cleaning Sprayer position mode.
INFORMATION
Do not use this 3D illustration as a reference. Please refer to the valve position modes table.
-
Engage the pump.
-
Activate Flushing mode on the app.
-
Spray approximately 100 litres | 26 US gal on an untreated area.
-
Turn off the pump.
-
Clean the filters (Cleaning | of filters).
-
When treatment is resumed, set valve D to 100% and agitate the mixture for 10 minutes in both zones (Agitation).
