-
Store the machine in a dry, covered area protected from weather and moisture, respecting the storage temperature range of -10 – 50 °C | 14 – 122 °F.
-
In cold weather, if there is a risk of freezing, follow the guidelines in chapter Preparing the sprayer for storage | Freeze protection of the machine.
-
Clean the machine. Do not use a pressure washer directly on the Vision boxes. After cleaning, check that the optical surfaces are completely clean. If necessary, clean them with glass cleaner and rinse them thoroughly with water.
-
Check the nozzles by following the instructions in chapter Nozzle check.
-
Lift the side modules.
-
Switch off the machine by pressing the green button on the ON/OFF control box.
INFORMATION
If the machine needs to be turned on again immediately after being shut down, wait until the Wi-Fi signal is lost on the tablet before turning the machine back on. This process takes a few seconds.