INFORMATION
-
Do not remove the manufacturer's plates, homologation plates and markings attached to the machine and its components.
-
These plates must be present even when the machine is resold.
-
These plates must be present during the periodic inspection of the machine.
Sprayer manufacturer's plate
The nameplate indicates the serial number that should be provided to the Ecorobotix representative when communicating or ordering parts.
This plate meets the requirements of the machinery directive (2006/42/EC 1.7.3) and is marked as follows:
-
Manufacturer’s name and address
-
FCC certification mark
-
Designation
-
Type
-
Mass
-
Year of construction
-
Serial number
Tank system manufacturer's plate
The nameplate indicates the serial number that should be provided to the Ecorobotix representative when communicating or ordering parts.
This plate meets the requirements of the machinery directive (2006/42/EC 1.7.3) and is marked as follows:
-
Manufacturer’s name and address
-
FCC certification mark
-
Designation
-
Type
-
Mass
-
Year of construction
-
Serial number
Fluidic kit - G1 - 19 for saddle tank (optional) manufacturer's plate
The nameplate indicates the serial number that should be provided to the Ecorobotix representative when communicating or ordering parts. This plate contains the following information:
-
Serial number
-
Designation
-
Date of manufacturing
Additionally, a QR-code is also present on the back of the fluidic kit (tractor side) with following information:
-
Serial number
Pump manufacturer's plate
The serial number is printed on the supplier plate attached to the pump.
This plate contains the following information:
-
Name and address of the manufacturer
-
Year of construction
-
Serial number
-
Designation
-
Flow rate
-
Pressure
-
Type